forums.ps2dev.org

[marslars]

Soo, here we are again :)

My working platform is Ubuntu 9.04, 32 bit

And i did the following to patch and install mplayer with vo ps3.

Got the newest mplayer from svn:
- svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer (rev 29324)
Got the newest spu-medialib + more from svn:
- svn co https://spu-medialib.svn.sourceforge.net/svnroot/spu-medialib spu-medialib (rev 263)
Got the newest libspe from svn:
- svn co https://libspe.svn.sourceforge.net/svnroot/libspe libspe
And downloaded speutils:
- wget http://speutils.googlecode.com/files/speutils-0.1.tgz

First I installed libspe2:
cd libspe/libspe2
make && make install

Then I installed speutils:
cd speutils-0.1
sh update.sh
cp spu
./configure --target=spu
cd ..
./configure --prefix=/usr
make && make install

Then I installed spu-medialib:
cd spu-medialib/trunk/spu-medialib
cd spu
./configure --target=spu
cd ..
./configure --prefix=/usr
nano spu/src/Makefile, edited OBJEXT = to OBJEXT = o
cd ..
cd ..
make && make install

Then I installed mplayer:
To patch mplayer i used the newest patch i could find from:
http://article.gmane.org/gmane.comp.video.mplayer.devel/52638/match=ps3
and saved it as mplayervo.patch
then i did:
cd mplayer
patch -p0 < ../mplayervo.patch
./configure --prefix=/usr/local --enable-ps3 --enable-alsa
make && make install

And then im ready to watch a movie, but I simply just can't get any fullscren. When I try to play it outputs:
mplayer -vo ps3 -ao alsa -zoom -fs -v sonoarch.avi

MPlayer SVN-r29324-4.3.3 (C) 2000-2009 MPlayer Team
AltiVec found
CPU: PowerPC
get_path('codecs.conf') -> '/root/.mplayer/codecs.conf'
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
Configuration: --prefix=/usr/local --enable-ps3 --enable-alsa
CommandLine: '-vo' 'ps3' '-ao' 'alsa' '-zoom' '-fs' '-v' 'sonoarch.avi'
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Unoptimized OnScreenDisplay
Using nanosleep() timing
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf: No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
get_path('sonoarch.avi.conf') -> '/root/.mplayer/sonoarch.avi.conf'

Playing sonoarch.avi.
get_path('sub/') -> '/root/.mplayer/sub/'
[file] File size is 576711530 bytes
STREAM: [file] sonoarch.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: AVI format
AVI file format detected.
list_end=0x146
======= AVI Header =======
us/frame: 41708 (fps=23.976)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 81309 initial: 0
streams: 2
Suggested BufferSize: 0
Size: 624 x 352
==========================
list_end=0xD4
==> Found video stream: 0
[aviheader] Video stream found, -vid 0
====== STREAM Header =====
Type: sdiv FCC: DIVX (44495658)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 23976024/1000000 = 23.976
Start: 0 Len: 81309
Suggested BufferSize: 106775
Quality 0
Sample size: 0
==========================
Found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 624
biHeight 352
biPlanes 1
biBitCount 24
biCompression 1145656920='DIVX'
biSizeImage 658944
===========================
Regenerating keyframe table for MPEG-4 video.
list_end=0x146
==> Found audio stream: 1
[aviheader] Audio stream found, -aid 1
====== STREAM Header =====
Type: sdua FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 48000/1152 = 41.667
Start: 0 Len: 141303
Suggested BufferSize: 0
Quality 0
Sample size: 0
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 1152
bits/sample: 16
cbSize: 12
mp3.wID=256
mp3.fdwFlags=0x2000000
mp3.nBlockSize=32772
mp3.nFramesPerBlock=256
mp3.nCodecDelay=0
==========================================================================
list_end=0x16A
hdr=Software size=16
Software : transcode-1.0.2
list_end=0x22299222
Found movie at 0x800 - 0x22299222
Reading INDEX block, 222612 chunks for 81309 frames (fpos=573149738).
AVI index offset: 0x0 (movi=0x800 idx0=0x800 idx1=0x1174)
Auto-selected AVI video ID = 0
Auto-selected AVI audio ID = 1
AVI: Searching for audio stream (id:1)
XXX initial v_pts=0.000 a_pos=0 (0.000)
AVI video size=518037530 (81309) audio size=53288496 (141303)
VIDEO: [XVID] 624x352 24bpp 23.976 fps 1222.0 kbps (149.2 kbyte/s)
Auto-selected AVI audio ID = 1
[V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.976 ftime:=0.0417
Clip info:
Software: transcode-1.0.2
get_path('sub/') -> '/root/.mplayer/sub/'
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using AltiVec optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 128 kbit Joint-Stereo, BPF: 384
Channels: 2, copyright: No, original: Yes, CRC: Yes, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16be, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16be -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/s16be
[dummy] Was reinitialized: 48000Hz/2ch/s16be
Trying preferred audio driver 'alsa', options '[none]'
alsa-init: requested format: 48000 Hz, 2 channels, 8
alsa-init: using ALSA 1.0.18
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: pcm opened in blocking mode
alsa-init: chunksize set to 256
alsa-init: fragcount=16
alsa-init: got buffersize=16384
alsa-init: got period size 256
alsa: 48000 Hz/2 channels/4 bpf/16384 bytes buffer/Signed 16 bit Big Endian
AO: [alsa] 48000Hz 2ch s16be (2 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy@streamminister.de>
AO: Comment: under developement
Building audio filter chain for 48000Hz/2ch/s16be -> 48000Hz/2ch/s16be...
[dummy] Was reinitialized: 48000Hz/2ch/s16be
[dummy] Was reinitialized: 48000Hz/2ch/s16be
Starting playback...
Increasing filtered audio buffer size from 0 to 18432
[ffmpeg] aspect_ratio: 1.772727
VDec: vo config request - 624 x 352 (preferred colorspace: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
VO Config (624x352->624x352,flags=5,'MPlayer',0x32315659)
VO: [ps3] 624x352 => 624x352 Planar YV12 [fs] [zoom]
VO: Description: PS3 framebuffer w/ spe offload courtesy of spu_medialib (https://sourceforge.net/projects/spu-medialib)
VO: Author: Bill Garrett <wgarrett <at> sc.rr.com>
VO: Comment: Kristian Jerpetjoen <kristian.jerpetjoen <at> gmail.com
VO: [ps3] Initiated
*** [vo] Allocating (slices) mp_image_t, 624x352x12bpp YUV planar, 329472 bytes
*** [vo] Allocating (slices) mp_image_t, 624x352x12bpp YUV planar, 329472 bytes
*** [vo] Allocating (slices) mp_image_t, 624x352x12bpp YUV planar, 329472 bytes
Uninit audio filters... 0.003 ct: 0.013 193/193 5% 42% 1.7% 0 0
[libaf] Removing filter dummy
Uninit audio: mp3lib
Uninit video: ffmpeg
VO: [ps3] Closed and re-enabled console.
alsa-uninit: pcm closed

So how can I fix this?? :) Thx in advance guys!

[jonathan]

I recall there being some problem with setting fullscreen from the command line - does it work if you press F while the video is running?

[marslars]

Yeah..i can get fullscreen by pressing F..but then it lags totally..so what to do?

I read some of the info on the gmane site, and saw the spu-medialib perhaps isn't prepared for 4 buffers yet? That might be someting or? :)

[jonathan]

I can't see why that video would be a problem...

Sorry, I have no more suggestions for the time being.

[marslars]

Thanks alot for the help :)

// Marslars